McIntosh MC1.2KW Electronic Interiors Brisbane

Home / Queensland / Products / Home Theatre & Stereo Components / Stereo Amplifiers / McIntosh Labs / McIntosh Power Amplifiers / McIntosh MC1.2KW /

McIntosh MC1.2KW

MC1.2KW

Power Amplifier

The most powerful single chassis McIntosh amplifier, the MC1.2KW produces a massive 1,200 watts. The MC1.2KW features the extraordinary McIntosh Quad Balanced Circuit. Each amplifier consists of two balanced amplifier circuits, the outputs of which are combined in the unique, hand-crafted McIntosh Output Autoformer. The result? Totally balanced operation from input to speaker output that cancels virtually all distortion.

The MC1.2KW can be used with all loudspeaker types and features output connections that are optimized for 2, 4, and 8-Ohms for low distortion performance and maximum power transfer. With features such as DC failure protection and remote power control, the MC1.2KW is an ideal marriage of power and performance. $15,590 rrp each

MC1.2KW Power Amplifier Specifications

POWER OUTPUT

1200 watts into an 8, 4 or 2 ohm load is the minimum sine wave continuous average power output.

OUTPUT LOAD IMPEDANCE

Terminals for 8, 4 and 2 ohms

RATED POWER BAND

20Hz to 20kHz

TOTAL HARMONIC DISTORTION

0.005% maximum harmonic distortion at any level from 250 milliwatts to rated power output.

DYNAMIC HEADROOM

2dB

FREQUENCY RESPONSE

+0, -0.25dB from 20Hz to 20kHz

+0, -3.0dB from 10Hz to 100kHz

INPUT SENSITIVITY

2.5V Unbalanced, 5V Balanced

A-WEIGHTED SIGNAL-TO-NOISE RATIO

120 below rated output, Unbalanced

124dB below rated output, Balanced

INTERMODULATION DISTORTION

0.005% maximum if instantaneous peak power output does not exceed twice the rated output, for any combination of frequencies from 20Hz to 20kHz

WIDE BAND DAMPING FACTOR

Greater than 40

INPUT IMPEDANCE

10,000 ohms

POWER GUARD

Less than 2% THD with 14dB overdrive

POWER REQUIREMENT

100 volts, 50/60Hz, 13 amps

110 volts, 50/60Hz, 12 amps

120 volts, 50/60Hz, 12 amps

220 volts, 50/60Hz, 7.5 amps

230 volts, 50/60Hz, 6.5 amps

240 volts, 50/60Hz, 6.5 amps

Standby: 0.5 watts

Overall Dimensions (H x W x D) Including feet and cables

2-5/16 inches (31.27cm) x 17-3/4 inches (45.09cm) x 22 inches (55.88cm)

Weight

147 pounds (66.7 kg) net

172 pounds (78.0 kg) in shipping carton

CEDIA Member and Sound Image Awards Winner